For piercing
at a high position of the panel
Working angle from 35° to 80°
Selectable shut height by option SH
| Mount Face Width |
Angle 5° increments |
Working Force kN (tonf) |
|---|---|---|
| 64 | 35°〜80° | 28.4 (2.9) |
Working angle from 10° to 30°
Compact cam contributes to more compact
tooling design and less machining process
| Mount Face Width |
Angle 5° increments |
Working Force kN (tonf) |
|---|---|---|
| 50 | 10°〜30° | 14.7 (1.5) |
For piercing on hard-to-reach areas
Working angle from 50° to 80°
Two types of cam slider length
Easy disassembly of cam slider
| Catalog No. |
Mount Face Width |
Angle 5° increments |
Working Force kN (tonf) |
|---|---|---|---|
| SACLB | 80 | 50°〜80° | 58.8 (6.0) |
| SACMB |
Working angle from 00° to 25°
Extendable mounting surface up to
150 mm forward
SULNC and SULNG are interchangeable
| Catalog No. |
Mount Face Width |
Angle 5° increments |
Working Force kN (tonf) |
|---|---|---|---|
| SULNC | 65 | 00°〜25° | 14.7 (1.5) |
| SULNG |
For back angle piercing
Variety of choices
Compact design
Minimal rear space removal
and ease of cam slider disassembly
| Catalog No. |
Mount Face Width |
Angle 5° increments |
Working Force kN (tonf) |
|---|---|---|---|
| SAPLC | |||
| SAPLS | 80 | 50°〜80° | 39.2 (4.0) |
| SAPLU |
