Burr Reduction Cam Unit
Thrust load transferred from trimming gets offset within the cam unit.
•Capable to withstand thrust load from all directions, right and left, up and down.
•Thrust pad no longer needed in the die.
•Space saving
Performance Evaluation
Horizontal location shift from/to; approx. 30% less!
Horizontal thrust to be supported perbendicular to the surfaces minimizing snifting, which results in minimizing burrs.
Vertical location shift approx. 70% less!
Supporting surface made in the cam driver for the cutting blade, which is designed to minimize mis-aligument at the processing areas.
Product Specifications
*CENTER LOAD working forces
Grade | Cam width [mm] | Working Force[kN(tonf)] | Angle (10-degree increment) |
Catalog No. |
Spring Type |
Application | |
---|---|---|---|---|---|---|---|
1,000,000 strokes |
300,000 strokes |
||||||
100 | 86.7 (8.8) |
103.9 (10.6) |
0°~70° | VACYHT100 |
|
Trim Flange |
|
140 | 112.8 (11.5) |
135.3 (13.8) |
0°~70° | VACYHT140 | |||
|
100 | 116.1 (11.8) |
139.2 (14.2) |
0°~70° | VACPHT100 |
|
Trim Flange |
140 | 159.3 (16.3) |
191.1 (19.5) |
0°~70° | VACPHT140 |
Grade | Cam width | Angle (10-degree increment) |
Catalog No. |
Spring Type |
---|---|---|---|---|
100 | 0°~70° |
|
||
140 | 0°~70° | |||
|
100 | 0°~70° |
|
|
140 | 0°~70° |
Gas Spring Coil Spring